1. Protect the exposed surface of the trap with adhesive tape that leaves no residue.
2. It is advisable to install vents in both the inlet and outlet piping of the grease trap.
3. The grease trap should be installed as close as possible to the source of the liquid waste discharge.
4. Clean the outside of the PVC pipe used to connect the trap as well as inlet and outlet couplings.
5 .Use PVC glue to adhere pipes.
6. Fill in the spaces with cement or grout the installed trap is recessed in the floor).
7. After the sealing grout has dried, the protective adhesive should be removed moments before handing over the finalized project to the client.
